Zhang Yuexin

C# programmer. Know a bit of hardware knowledge. 3D model design novice.

张高兴 - 土味儿编程

高兴不高兴

OpenSCAD 建模:矿泉水瓶盖

本文约 210 字,包含 1 张图片,1 个代码段,阅读时间约 1 分钟
QR Code

在手机上查看此页面


下载地址:https://github.com/ZhangGaoxing/openscad-models/tree/master/BottleCap

代码:

module screw(r=15){
    for(g=[0:1:240]){
        translate([cos(g)*r,sin(g)*r,(g)/40])
        rotate(a=[93,60,g])
        cylinder(.6,.6,.6,center=true,$fn=3);
    }
}

module ring(h,r1,r2){
    difference(){
        cylinder(h,r1,r1,$fn=200);
        cylinder(h,r2,r2,$fn=200);
    }
}

union(){
    // Cylinder shell
    difference(){
        cylinder(14,16.5,16.5,$fn=200);
        translate([0,0,2])cylinder(13,15.5,15.5,$fn=200);
    }
    // Patterns on the shell
    for(i=[0:0.2:10]){
        rotate(i*360/10,[0,0,1])
        translate([0,16.5,0])
        cylinder(14,.5,.5,$fn=200);
    }
    // Washer
    translate([0,0,1])ring(4,12.5,12);
    translate([0,0,1])ring(2,14.5,14);
    // Screw
    union(){
        translate([0,0,6])screw(15);
        translate([0,0,6])rotate([0,0,120])screw(15);
        translate([0,0,6])rotate([0,0,240])screw(15);
    }
}

效果图:

最后更新时间 : 2017/07/07 10:58 张高兴 阅读(376) 评论(0)
文章分类: OpenSCAD 建模
文章标签: OpenSCAD
  发表评论
Click to Refresh